Preparations For Jacking

  1. Park the vehicle on a firm, level surface. Avoid ice or slippery areas.

    Warning!:

    Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid being hit when operating the jack or changing the wheel.

  2. Turn on the Hazard Warning Flashers.

  3. Apply the parking brake.

  4. Shift the transmission into PARK (P).

  5. Turn the ignition OFF.

  6. Block both front and rear of the wheel diagonally opposite of the jacking position. For example, if the driver’s front wheel is being changed, block the passenger’s rear wheel.

Wheel Blocked Example

Note:

Passengers should not remain in the vehicle when the vehicle is being raised or lifted.

Parent topic: JACKING AND TIRE CHANGING