Tailgate Removal

Note:

Removing the tailgate will disable the rearview camera function.

To remove the tailgate, refer to the following instructions:

  1. Disconnect the wiring harness for the rear camera and or power locks (if equipped) Disconnecting The Rear Camera And Remote Keyless Entry.

  2. Unlatch the tailgate and remove the support cables by releasing the lock tang from the pivot.

    Note:

    Make sure tailgate is supported when removing support cables.

    Locking Tang

  3. Position the tailgate on a 45 degree angle.

  4. Raise the right side of the tailgate until the right side pivot clears the hanger bracket.

  5. Slide the entire tailgate to the right to free the left side pivot.

  6. Remove the tailgate from the vehicle.

Note:

Do not carry the tailgate loose in the truck pickup box.

Warning!:

To avoid inhaling carbon monoxide, which is deadly, the exhaust system on vehicles equipped with “Cap or Slide-In Campers” should extend beyond the overhanging camper compartment and be free of leaks.

Parent topic: TAILGATE