-
Using a fuel filter that does not meet the manufacturer's filtration and water separating requirements can severely impact fuel system life and reliability.
-
The underbody mounted filter housing will cause the engine not to run if no filter is installed.
Underbody Mounted Fuel Filter Assembly
|
1 — Drain Valve |
-
Diesel fuel will damage blacktop paving surfaces. Drain the filter into an appropriate container.
-
Do not prefill the fuel filter when installing a new fuel filter. There is a possibility debris could be introduced into the fuel filter during this action. It is best to install the filter dry and allow the in-tank lift pump to prime the fuel system.
-
Ensure engine is turned off.
-
Place drain pan under the fuel filter drain hose.
-
Open the water drain valve one full turn counterclockwise and completely drain fuel and water into the approved container.
-
Close the water drain valve.
-
Remove lid using a socket or strap wrench. Rotate counterclockwise for removal. Remove used o-ring and discard it.
-
Remove the used filter cartridge from the housing and dispose of according to your local regulations.
-
Wipe clean the sealing surfaces of the lid and housing.
-
Install new o-ring back into ring groove on the filter housing and lubricate with clean engine oil.
Water In Fuel (WIF) sensor is reusable. Service kit comes with new o-ring for filter canister and WIF sensor.