6–Speed Transmission

If a malfunction occurs and the gear selector cannot be moved out of the PARK position, you can use the following procedure to temporarily move the gear selector:

1. Turn the engine OFF.

2. Firmly apply the parking brake.

3. Tilt the steering wheel to the full up position.

4. Press and maintain firm pressure on the brake pedal.

5. Insert a screwdriver or similar tool into the access port (ringed circle) on the bottom of the steering column, and push and hold the override release lever up.

   

   Gear Selector Override Access Port Location

   

   Gear Selector Override Access Port

   

   Engaging The Access Port

6. Move the gear selector to the NEUTRAL position.

7. The vehicle may then be started in NEUTRAL.