Tri-Fold Tonneau Cover Removal

To remove the Tonneau Cover, use the following steps:

1. Open the tailgate to gain access to the rear pair of Tonneau Cover clamps located on the underside of the cover.

   

   Location Of Rear Latches

   Note:

   If clamp wire is damaged replace immediately.

2. Pull both clamp handles down to release the Tonneau Cover’s rear panel.

   

   Released Position

3. From the Released Position, send the clamps to the Stowed Position by pushing from the yellow bumper upward. Listen for a “clicking” sound to confirm the clamp has been stowed properly.

   

   Stowed Position

   CAUTION!:

   Make sure the Tonneau Cover clamp and clamp wire are in the proper stowed position. If the clamp and clamp wire are not properly stowed, damage to the Tonneau Cover material will result.

4. Fold the rear panel up onto the center panel (Intermediate Position).

   

   Folded Rear Panel (Intermediate Position)

   Note:

   The vehicle cannot be driven when the Tonneau Cover is in this position.

5. Fold the rear and center panels up onto the front panel (Tri-Folded Position).

   

   Tri-Folded Position

   

   Incorrect Folding — Will Cause Damage

   

   Correct Folding — Hold Panels Together

   Note:

   • When folding the center and rear panels, the sections MUST be held together to avoid damage to the cover material.

   • Fold the panels gently. It is not recommended to allow the panels to drop under their own weight.

6. Clip both stowage straps to prevent the Tonneau Cover panels from unfolding.

   CAUTION!:

   The folded Tonneau Cover must be latched by both front latches and both front stowage straps or damage to the Tonneau Cover or vehicle may occur.

   

   Stowage Strap

7. Once in the Tri-Folded Position, pull both front clamp handles down to the Released Position.

   

   Released Position

8. From the Released Position, send the clamps to the Stowed Position by pushing from the yellow bumper upward. Listen for a “clicking” sound to confirm the clamp has been properly stowed.

   

   Stowed Position

9. Utilizing two people, remove the Tonneau Cover.