Push and release the Remote Start button on the key fob twice within five seconds. The vehicle doors will lock, the parking lights will flash, and the horn will chirp twice (if programmed). Then, the engine will start, and the vehicle will remain in the Remote Start mode for a 15 minute cycle.
Pushing the Remote Start button a third time shuts the engine off.
To drive the vehicle, push the unlock button, and place the ignition in the ON/RUN position.
With Remote Start, the engine will only run for 15 minutes.
Remote Start can only be used twice.
If an engine fault is present or fuel level is low, the vehicle will start and then shut down in 10 seconds.
The parking lights will turn on and remain on during Remote Start mode.
For security, power window and power sunroof operation (if equipped) are disabled when the vehicle is in the Remote Start mode.
The ignition must be placed in the ON/RUN position before the Remote Start sequence can be repeated for a third cycle.
If your power door locks were unlocked, Remote Start will automatically lock the doors.
All of the following conditions must be met before the engine will remote start:
Gear selector in PARK
Doors closed
Hood closed
Hazard switch off
Brake switch inactive (brake pedal not pressed)
Battery at an acceptable charge level
Panic button not pushed
Fuel meets minimum requirement
System not disabled from previous Remote Start event
Vehicle Security system not active
Malfunction Indicator Light (MIL) is not illuminated
Do not start or run an engine in a closed garage or confined area. Exhaust gas contains carbon monoxide (CO) which is odorless and colorless. Carbon monoxide is poisonous and can cause serious injury or death when inhaled.
Keep key fobs away from children. Operation of the Remote Start system, windows, door locks or other controls could cause serious injury or death.