Center High Mounted Stop Lamp (CHMSL) With Cargo Lamp

See the following steps to replace:

1. Remove the two screws holding the housing/lens to the body as shown.

   

   CHMSL Mounting Screw Locations

2. Separate the connector holding the housing and wiring harness to the body.

3. Turn the desired bulb socket a quarter turn and remove the socket and bulb from housing.

4. Pull the desired bulb straight from the socket.

   

   CHMSL Bulb And Socket

   CAUTION!:

   Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result.

   • Outside Bulbs: Cargo Lamps

   • Inside Bulb: Center High Mounted Stop Lamp

5. Reverse the procedure for installation of bulbs and housing.